Fire Safety Door Hardware- D&D HARDWARE INDUSTRIAL Co.,Ltd .

You are here: Home » Solutions » Fire Safety

Fire Safety

UL305 Panic Hardware
UL 305 is the primary U.S. safety standard that applies specifically to panic hardware and fire exit hardware. It defines how panic devices must perform in emergency situations to ensure that occupants can escape quickly and safely.Below is a clear and complete explanation:✅ What UL 305 Means for Pa Read More
CE EN1125 Panic Exit Device Standard
✅ EN 1125 – Full Classification Levels for Panic Exit DevicesEN 1125 uses a 14-digit classification, but only 10 main performance categories are graded.Below is the full list.1. Category of Use (Digit 1)Grades: 1 levelGradeMeaning3High frequency of use (the only grade allowed for panic devices)EN 11 Read More
CE EN1935 Door Hinge Standard
✅ Full EN 1935 Classification System (All Digits Explained)EN 1935 uses 8 categories, represented by one digit each, except the last category (hinge grade), which may have two digits.The full code format is:Digit 1 – Digit 2 – Digit 3 – Digit 4 – Digit 5 – Digit 6 – Digit 7 – Last digits (11–13) Ex Read More
NFPA ® 80 Criterion for Fire Doors and also Various Other Opening Protectives
NFPA ® 80 Criterion for Fire Doors and also Various Other Opening Protectives,Secure openings in ranked wall surfaces, floorings, and ceilings against the spread of fire and also smoke utilizing the latest demands in NFPA 80, Requirement for Fire Doors and also Various Other Opening Protectives.In a Read More
UL 10C Fire Door viewers
Door viewers are commonly employed on hotel, motel, and apartment entrance doors with the purpose of allowing individuals to visually assess the person on the opposite side of the door without necessitating the act of opening the door. Conference and meeting rooms often have door viewers, which ena Read More
Hinge for Fire Proof Door is CE certified
The door leaf should be hung on single-axis hinges in accordance with local and national regulations when used in a fire-resisting door assembly. Hinges on fire-resisting doors need to meet the required fire rating and also allow the door closing device to reliably close the door leaf from any angl Read More
CE BS EN12209 Door Lock
CE BS EN12209 Door LockThe D and D Equipment door lock have actually been effectively checked to all the requirement of BS EN 12209.Functions & attributesD and D Equipment's Lock and also lock made to sustain the whole the door bars, handles and various other unsprung furniture.The variety is suitab Read More
BS EN1303 Door Lock Cylinder
BS EN1303 Door Lock Cylinder图1. Classification of useOne category is recognized.Quality 1: For use by people with a high incentive to exercise treatment and with a small chance of mis-use..2. Longevity.3 qualities are determined according to the variety of examination cycles attained.Quality 4: 25 0 Read More
Grade1 Mortice Lock, compliant with ANSI standards
Grade1 Mortice Lock, compliant with ANSI standards. ANSI 156.13, an American National Standard Institute (ANSI) specification. 1. THE RANGE OF THINGS COVERED OR DEALT WITH BY SOMETHING This Standard sets forth performance requirements for Mortise Locks and Latches. The requirements encompass oper Read More

Total 2 pages Go to Page
Go

CE, UL, ANSI/BHMA Certified Hardware for Metal Doors, Fire Rated Doors, Wooden Doors etc. We have Rich Experience working with Famous Brands, Door Factories, Proiect Contractor, etc.

Quick Links

Product Category

Support

Coutant

Get Famous Branded Quality at Factory Cost

Tel / WhatsApp / Wechat:
+86-13929037292

ADD:

12th Floor, Building 2, No.898, KeChuang Technical Zone, Jiangmen Avenue, Pengjiang District, Jiangmen City, Guangdong, China 529000

E-mail:

sales@danddhardware.com

david@dndhardware.com

(David Jian)

account@dndhardware.com

(Ms Judy)