Entrance to the store consists of a single glass door without an overhead panel

 The main considerations for door design are outlined below:

1. Where is the location of the building and inner door? 

2. The location of the interior door 

3. Frequency of a door opening and closing 

The main concerns for this configuration are as follows: 

1, friendly to the user 

2, Security 

Door opening & closing description: 

 Push or pull to opening the door when unlock. 

 Use key to lock or unlock the patch fitting lock on either side. 

This configuration is appropriate for the applications listed below:

Door hardware associate 

Glass Bottom patch fitting-DDPT001 

Bottom side-hung leaf corner fitting with mount for flat conical spindle with installation materials for glass thicknesses 10-12 mm 

Top patch fitting pivot-DDPP203 

Upper pivot bearing with pivot bearing bolt (15 mm dia.) 

Glass Top patch fitting-DDPT003 

Top side-hung leaf corner fitting with pivot bearing bolt mount (15 mm dia.) 

With installation materials for glass thicknesses 10 -12mm. 

Glass Patch fitting lock-DDPT004 

Patch fitting lock with square dead bolt, with installation materials for glass thickness 10-12 mm, with Euro-profile cylinder and strike plate/recess. 

Glass door pull handle-DDPH001 

If the door needs to be self-closing, match it with the floor spring - DDFS222. 

Floor spring, made of stainless steel 304 with a size of 305x146x51.5mm, and an inside casting iron component. 

D&D HARDWARE INDUSTRIAL Co.,Ltd. remains the same after rephrase. is an extremely competent and professional company specializing in exterior door hardware.We have ample experience in the production and sales of hardware, having cooperated with all nations. You can feel confident in selecting us. To inquire about our exterior door hardware, please contact us through our website. We are constantly available to assist you. 

Now contact us